First you need to make sure the email address(es) you will be sending from have been authorised for your account in our Control Panel.
These instructions assume your email server / account has already been
setup and is collecting email correctly.
Take a note of any settings you change.
Only change the items specified - you should not need to change your
incoming email settings.
These instructions are only for Apple iPhone and iTouch using iOS5 - for other
email programs please see How To
or contact us.
Select 'Settings' from the home page
Scroll down and Select 'Mail, Contacts, Calendars'.
Select the email account you wish to modify.
Scroll down to 'Outgoing Mail Server' and click 'SMTP'.
Click on the 'Primary Server'.
Make sure the slider is 'On' and enter the AuthSMTP host name (as
supplied in your signup email), typically 'mail.authsmtp.com'.
Enter the username and password (as supplied in your signup email).
Change 'Use SSL' to off (unless you do want to use SSL and have already
enabled SSL in the AuthSMTP Control Panel).
Click on 'Authentication' and select 'MD5 Challenge-Response' - then go
back to the previous screen.
Click on the 'Server Port' and change to one of the alternate port
numbers - we would recommend that you use port 325 but you can also use 23,
26 or 2525 - port 25 is available but is blocked by many ISPs.
Use port 325 if you specifically DO NOT want to use SSL encryption.
If you DO wish to use 'SSL' - move the 'SSL' slider to on, change the port
to '2525' and then you MUST login to the control panel (Advanced Configuration tab)
and enable SSL on your account.
Click 'Done' - you should now see:
Go back until you get back to the main 'Settings' page.